• Skip to primary navigation
  • Skip to main content
  • Skip to footer

Sensitivus

Advanced Sensor Technology

  • TORQUE + ANGLE SENSING
    • TECHNOLOGY
      • TECHNOLOGY COMPARISON
      • MAGNETOSTRICTIVE COMPARISON
    • DESIGN WORKSHOP
    • SENSOR DESIGNS
      • SG210 INDUSTRIAL SENSOR
      • SG30 SENSOR SET
      • SG12 STRAIN GAUGE INTERFACE
    • SENSOR MODULES
    • E-BIKE REFERENCES
  • FLEXSPLINE TORQUE SENSING
  • E-BIKE INSIGHTS
  • ABOUT
    • NEWS
    • Product history and archive
    • Jobs

Flexspline Torque Sensor

Torque sensing built into the gear

Humanoid robots and collaborative robots need accurate torque feedback in every joint. Today that usually means a separate torque sensor, which adds length, weight, cost and fragile wiring to each joint.

OmniStrain™ takes a different approach. The complete torque sensor, with sensing, compensation and electronics, is integrated into a thin flexible circuit bonded directly to the flexspline of the strain wave gear. The gear itself becomes the sensor.

 

Made for vertical integration

Robot makers who succeed at volume control their key components. OmniStrain is offered as a technology license for volume production, and we support you from the first prototype to your production line.

 

Why OmniStrain

  • Integrated. Sensing and electronics in one part on the flexspline. No separate sensor and no extra length in the joint.
  • Robust. No fragile strain gauge wiring. Everything is routed and sealed as part of the flexible circuit.
  • Designed for accuracy. The sensing pattern is designed to suppress the gear’s own internal strain, so the output follows the joint torque.
  • Ready for volume. Built in the standard flex-circuit supply chain with an automatable assembly step, so cost follows flex-circuit volumes.
  • Redundancy option. Duplicate sensing for safety-critical joints.

 

Integrated sensing versus individual strain gauges

OmniStrain™ Individual strain gauges
Bonding One bond, simple alignment Several gauges, each aligned separately
Wiring None, integrated in the circuit Many discrete wires
Sealing Sealed during manufacturing Manual potting after wiring
Electronics On the same flexible circuit Separate conditioning board
Production Automatable, commodity supply chain Manual steps, specialist supply chain

 

Status

OmniStrain™ is patent pending. Prototypes, measured performance and a live demo are available on request.

 

Get in touch

Contact Kristian Lindberg, at kl@sensitivus.dk to arrange a demo or discuss your joint design.

ADDRESS

Sensitivus
Fruebjergvej 3
2100 Copenhagen
Denmark
info@sensitivus.com

EU VAT-ID: DK44818361

IMPRESSUM

DROP US A LINE

© 2015–2026. BY USING THIS SITE WITH COOKIES ENABLED IN YOUR BROWSER YOU CONSENT TO THE COOKIE POLICY and PRIVACY POLICY